|Name:||Wholesale Cordierite Stand With Low Price For Kiln Furniture||Material:||Cordierite|
|Using Temperature:||1280℃||Volume Density(g/cm3):||2|
|Apparent Porosity,%:||28||Type:||Kiln Post|
Cordierite ceramics are well known for their low thermal expansion and refractory character. Although cordierite is available as a powder, when we use the term we are generally talking about ceramic that went into the kiln as ordinary composite of ceramic powders but emerges as a cordierite crystalline matrix (grown by the firing process tuned to its needs).
A. Weight reduction of approximately 35% - 50%, whilst increasing the load capacity of the batt. For example, a 38mm-thick extruded batt has the same weight as a 23mm-thick pressed batt of the same size, but can bear 5 times the load.
B. Energy Savings. Tests have shown that using extruded batts in a shuttle kiln firing glass panels, fuel consumption can be reduced by between 30% and 70%.
C. Reduced bend at high temperatures. 1200mm long extruded batts supported by silicon carbide beams have shown virtually no bend during use. This is extremely useful where flatness is critical, such as in the firing of glass panels.
D.Their ability to disperse heat is twice that of a solid batt of similar size, allowing them to bear extremes of hot and cold much better, thereby increasing their service life. This makes extruded batts especially suitable for faster firings.
3. Specification of Cordierite
|Modulus of rupture,||20℃||≥5|
|Max. service temp.||1280℃|
4. ur Services
You can connect us at any time.Your problems can be responsed in 12 hours can we will give you solutions in 24 hours.Also if there is any problem about our products' quality,we accept resending them again.Thank you.
Contact Person: tao